3 - 6.5 GPM Pressure Washer Plumbing Kit Horizontal Leg Tank or Any Water Tank PL-4-TA TRAPPED Use with 1 1/2 no

Use with 1 1/2 no collapsible suction hose 1-1/2" (order #AGC24 25-foot length)

YVB5121B 21 GPM 5100 psi multi-gun unloader 1/2" FPT in/out/bypass

Do NOT use galvanized fittings or metal ball valves between your pump and water tank because they will likely corrode and flake little chunks into your pump valves leading to vibration and/or damage

Kit 44 Piston Rod Oil Seal Kit

This pressure washer will arrive with a Duraview inlet filter (Female garden hose inlet) installed into the left side of the manifold

3 - 6.5 GPM Pressure Washer Plumbing Kit Horizontal Leg Tank or Any Water Tank PL-4-TA TRAPPED Use with 1 1/2 no3 6. 5 GPM Pressure washer plumbing kit for a horizontal leg tank (any water tank with a flat wall) with everything needed to correctly plumb the supply side of the pump from the horizontal leg tank and unloader bypass return hose. Completely remove the garden hose inlet on the bottom of the pump. There should be nothing to plug. The 1" hose barb x 1 2" mpt will install into the pump inlet. Included in the kit are as follows: 1 x 1 80 mesh Y Strainer